Application temperature: from –400C
Service temperature: from –51°C to +176°C.
Working time: 15–20 minutes with a 6 mm nozzle opening.
Surface preparation: Remove dirt and any other material that could prevent proper sealant adhesion. All substances that may interfere with bonding must be removed. The user is responsible for proper surface preparation. Use masking tape for neat sealant lines and remove it before the sealant cures.
Application: Titebond® 100% Silicone is ready to use. Apply with a professional sealant gun, dispensing into openings, cracks, gaps or holes. Fill the joint completely and repeat if necessary. For joints deeper than 1.3 cm, use a suitable backing material. Test suitability thoroughly on the intended surfaces before starting work.
Cleaning:
Use white spirit or an equivalent solvent, following the solvent supplier's precautions. Wash hands with soapy water after use. Remove cured sealant with a knife or other mechanical method.
Once cured, excess sealant must be cut away. Follow the solvent supplier's precautions when using solvents. Wash hands with soapy water after use.
