Shop
€44.98
Titebond Acoustical Ceiling Tile is a water-based construction adhesive for acoustic ceiling tiles and panels. Specifically developed for convenient ceiling installation on many common porous building surfaces.
Fast, strong initial grab. Helps hold pressed tiles firmly in place and reduces the risk of slipping during installation.
Used to bond acoustic tiles to painted and unpainted plasterboard, concrete, metal, hardboard, plywood and timber. Surfaces must be dry, sound and clean.
Open time: approximately 15 min.
Application temperature: from +10 °C.
Coverage: approximately 1.5 m²/l, or approximately 5.7 m² per 3.78 l pack, depending on installation conditions.
| Thumbnail | SKU | Quantity | Weight | Price | Quantity | |
|---|---|---|---|---|---|---|
 | 2706 | 3,78l | 037083027068 | €44.98 |
| Weight | 0 |
|---|---|
| Quantity | 3,78l |
Application temperature: from +10°C
Service temperature: from –18°C to +49°C
Open time: 15 min.
Tools: Mason's trowel
Removing excess: Water-dampened cloth
Coverage: approximately 1.5 m² per litre
Preparation: Surfaces must be dry and completely free from substances that could interfere with adhesion.
Application steps: Allow the adhesive and materials to acclimatise to room temperature for 24 hours before installation. Note: Do not use when air, adhesive or materials are below 10°C.
Using the buttering method, coat a generous area at each tile corner with a thin layer. Then apply 25–38 mm mounds of adhesive, roughly golf-ball size, 50–75 mm from the corners on the back of the tile.
Immediately press the tile into place, moving it back and forth by 13 mm to flatten the adhesive mounds to about 5 mm thick and 64 mm in diameter.
For interlocking tiles, do not slide the tile into the adjoining groove until it has been pressed to the correct level against the ceiling.
Product type: Polymer emulsion
Colour: Sand-coloured
Solids: 70%
Viscosity: 200 000 cps
Freeze/thaw stability: Stable
Shelf life: More than 2 years in an unopened container
VOC: up to 50 g/L
Odour: mild
Store in a cool, dry place. For best results, use above +10°C.
Caution: See the safety data sheet for further information. PROTECT FROM FREEZING. KEEP OUT OF REACH OF CHILDREN!
