Titebond Cold Press for Veneer – cold-press veneering adhesive for bonding wood veneer to MDF, particleboard and plywood in furniture making.
Properties and applications
- Specially developed for panel veneering.
- Reduces glue bleed-through through wood veneer.
- Longer time to position veneer and prepare the substrate.
- Uncured glue cleans up with water.
Bonding wood veneer
Spread the adhesive evenly over a flat, clean, porous substrate. Position the veneer and press under the conditions specified in the technical data sheet.
This adhesive is designed for veneering. For general wood assembly, select a wood glue intended for that purpose.
Strength and working conditions
Impressive bond strength of approximately 176.3 kg/cm². In the manufacturer's ASTM D905 test on hard maple joints at room temperature, Titebond Cold Press for Veneer achieved a shear strength of 2508 psi (approximately 17.3 MPa).
Open time approximately 15 min.; total assembly time 15-20 min. at +21 °C and 50 % relative humidity. Apply above +10 °C.
Shake the container thoroughly before use to ensure a uniform consistency and viscosity.
Safety and use
No harmful fumes associated with contact adhesives. Titebond Cold Press for Veneer does not emit the harmful or corrosive fumes associated with most contact adhesives. According to the Safety Data Sheet, the mixture is not classified as hazardous. Use as intended and follow the Safety Data Sheet instructions.
Available pack sizes: 948 ml and 3.78 l.
