Titebond Instant Bond Jet Black – black, rubber-toughened instant CA adhesive for wood and other materials, filling gaps and cracks and creating decorative inlays.
Product properties and application
Titebond Instant Bond Jet Black is a black, rubber-toughened instant cyanoacrylate adhesive for wood and other compatible materials. Suitable for wood repair, turning and carving, filling gaps, cracks, joint gaps and voids, and creating inlays and decorative inserts. Cures to a gloss black glue line.
Impressive bond strength of 196.85-295.28 kg/cm². The stated strength depends on the materials being bonded and should be assessed for the particular joint.*
- ✓ For bonding and gap filling
- ✓ Rubber-toughened, impact-resistant formulation
- ✓ For wood and other compatible materials
- ✓ Gloss black glue line
- ✓ For repairs and decorative inlays
- ✓ The cured filler can be sanded
Bond strength: 196,85-295,28 kg/cm²*
Viscosity: 500 cps.
Application temperature: from +13 °C to +29 °C.
Full cure: within 24 hours.
Compatible materials. Wood, metal, rubber, ceramics, plastic, stone, leather, PVC, granite, porcelain, fibreglass and gemstones. Check compatibility with the specific surfaces in an inconspicuous area before bonding.
Resistance and finishing. The rubber-toughened formulation provides high impact resistance. Cured adhesive resists solvents, heat and cold, with a service temperature range of -54 °C to +138 °C. It does not interfere with subsequent surface finishing. Test compatibility with the chosen coating on a small area first.
Use with an activator. Works without an activator. Titebond Instant Bond Activator can reduce initial setting time by approximately 50 %. This is not the full curing time.
Product purity and dispensing. Triple-distilled for high purity. The convenient, clog-resistant bottle nozzle helps dispense the adhesive precisely.
Preparation and bonding. Surfaces must be clean and dry. Test in an inconspicuous area before use, particularly when bonding other materials or treated surfaces. Dispense small quantities and protect the surrounding timber from staining.
Gaps and decorative inlays. The black colour is suitable for filling wood cracks and gaps and highlighting decorative details. The cured glue line remains black and the filler can be sanded. Allow the adhesive to cure before sanding and final finishing.
Curing. Initial cure: 40-60 seconds; full cure: 24 hours. Curing time depends on the materials and ambient conditions.
Application limitations and storage. For interior use. Do not use outdoors or where significant moisture is likely. Store in a cool, dry place. For best results, bond at temperatures from +13 °C to +29 °C.
Cleaning. The technical data specify acetone for cleaning. Check its suitability for the surface in an inconspicuous area first.
Safe use. Protect skin and eyes: cyanoacrylate adhesives can rapidly bond skin and eyelids. Follow the label and Safety Data Sheet instructions. Keep out of children's reach.
*Bond strength: 2800-4200 psi / 196.85-295.28 kg/cm², depending on the materials bonded. This is a strength range for joints between different materials and should not be compared directly with other adhesive test results without considering the test conditions.
Application examples are available under Video, with full details in the attached PDF documents.
