Sale!
A 281 ml Titebond TiteGrab Plus construction adhesive cartridge against a white background
Titebond TiteGrab Plus cartridge and presentation of strong adhesion and durability
Dispensing Titebond TiteGrab Plus and demonstrating fast initial grab
Applying Titebond TiteGrab Plus beads to a trim component
Illustration of Titebond TiteGrab Plus advanced polymer technology
Dispensing Titebond TiteGrab Plus beads onto a vertical surface
Pressing a decorative trim to a wall with Titebond TiteGrab Plus
Titebond TiteGrab Plus illustration for vertical surfaces and boats
Titebond TiteGrab Plus water and weather resistance illustration with temperature information
Titebond TiteGrab Plus materials chart: concrete, wood, metal, glass, mirrors and finishing panels
A box of 12 × 281 ml Titebond TiteGrab Plus cartridges
Titebond TiteGrab Plus cartridge with examples of bonding wood, brick and trims

Titebond TiteGrab Plus – construction adhesive with exceptionally strong initial grab for interior and exterior use

€11.86 - €120.96

Titebond TiteGrab Plus is a polymer construction adhesive with exceptionally strong initial grab for interior and exterior use. Designed to fix finishing elements quickly to vertical surfaces. Thick yet easy to dispense, the adhesive helps hold components in place and, in many cases, reduces the need for additional supports and fixings.

Strong initial hold in just 5 seconds. As a guide for initial fixing, allow approximately 14 cm of adhesive bead per 1 kg of weight, with up to 36 kg per cartridge. This is an indication of initial holding capacity, not the cured bond strength in kg/cm²; results depend on the substrate, component and bonding conditions.

  • For interior and exterior use
  • Water-resistant
  • For porous and non-porous materials
  • Flexible, non-shrinking bond

Bonds wood, metal, concrete, stone, marble, brick, OSB, foam board, ceramic tiles and cement boards. Suitable for mirrors, skirting boards, mouldings, decorative trim, wall panels and kitchen splashbacks, subject to the application limitations.

Repositioning time: up to 10 min.
Application temperature: from -18 °C to +49 °C; in cold conditions, keep the adhesive at room temperature.
Full cure: approximately 24 hours, depending on conditions.

More about the adhesive and its propertiesCollapse detailed description

Resistance and durability. Resistant to water, frost and heat, and virtually odourless. The advanced polymer formulation does not shrink, remains flexible and resists ageing. Not suitable for continuous immersion in water.

Installation on vertical surfaces. Fast initial grab helps prevent components from slipping, shortens installation time and reduces expenditure on fixings. Large mirrors and heavy vertical elements require permanent mechanical fixing. Below +15 °C, provide additional temporary support for at least 24 hours.

Wide range of applications. Suitable for painted surfaces, floor and bath trim, fireplace surrounds, shelving, panels, plasterboard on timber or metal studs, and vertical landscaping features. Check substrate suitability and adhesion before bonding.

A full box contains 12 cartridges. Select a pack below to see the box price, unit price and saving. The offer applies to online orders.

Titebond TiteGrab Plus – construction adhesive for vertical surfacesInstant grab – properties, application and technical data

Product information in Lithuanian · PDF · Opens in a new tab

View the construction adhesives catalogueConstruction adhesives – selection and application.

PDF in English · Opens in a new tab

SKU: N/A Category: Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

ThumbnailSKUQuantityWeightPriceQuantity 
A 281 ml Titebond TiteGrab Plus construction adhesive cartridge against a white background
6701281ml037083067019€11.86
A box of 12 × 281 ml Titebond TiteGrab Plus cartridges
12-6701Box of 12 Original price was: €142.32.Current price is: €120.96.

Product features

  • Extremely fast initial grab on vertical surfaces (5 seconds);
  • Maximum initial grab and holding power (a 14 cm bead of adhesive is required for each 1 kg of weight);
  • Excellent handling – easy to dispense and reposition for up to 10 minutes;
  • All-weather application – will not freeze and is waterproof;
  • Versatile – suitable for many building materials, except those listed under limitations;
  • Very thick (high viscosity);
  • In many cases, eliminates the need for nails, screws and other mechanical fixings;
  • Advanced polymer technology – zero shrinkage. Remains permanently flexible and will not become brittle with age;
  • Reduces installation time and expenditure on fixings;
  • Excellent resistance to ageing;
  • Application temperature from -18°C to +49°C.

Applications

  • Mirrors;
  • Mouldings and decorative trim;
  • Panels and cladding boards;
  • Fireplace trim;
  • Bath surround panels and tiles;
  • Foam board;
  • Vertical shelving;
  • Vertical landscaping walls;
  • Kitchen wall panels and splashbacks;
  • Bonding plasterboard to timber or metal studs;
  • Cement boards;
  • Concrete, stone;
  • Vertical landscaping features;
  • Boards and panels;
  • Skirting boards;
  • Heavy decorative elements.
Quantity

281 ml, Box, 12 pcs

Product type: Advanced polymer
Colour: White/cream
Viscosity: 1,000,000 cps
pH: 5.0
Freeze/thaw stability: Stable
VOC: <50g/L
Flashpoint: none  
Average coverage per cartridge: ~5,5m
Full cure: after 24 hours (depending on the surface temperature and relative humidity).

Application temperature: from –180°C to +490°C, ideally from +150°C to +320°C. Below +15°C, bring the product to room temperature and provide temporary support for at least 24 hours. Not intended for prolonged exposure above +92°C.

Application details: dispense a continuous triangular bead at least 1.2 cm from the edge of the item. Heavy or wide items may require more than two continuous horizontal beads from edge to edge. Leave at least 2.5 cm between beads. Press the item firmly onto the surface with a twisting motion and hold for 5 seconds.

Working time: 10 minutes, depending on surface, air and product temperatures.

Surface preparation: Remove dirt and any material that could prevent proper adhesive bonding. All substances that may interfere with adhesion must be removed. The user is responsible for proper surface preparation.
Cleaning: Remove uncured adhesive with white spirit or acetone. Wash hands with soapy water after use.

Do not use when the adhesive is below +5°C; in colder conditions, ensure the product remains at least +5°C. Not recommended on PE (polyethylene), PP (polypropylene), PC (polycarbonate), PMMA (acrylic glass), PTFE, neoprene, rubber or bituminous substrates. Not for use around pools or in areas containing chlorides. Unsuitable for continuous immersion. Not intended for direct flame contact or very hot surfaces; high temperatures can affect bond strength. Large mirrors and other heavy vertical installations require permanent mechanical fixings. Do not use as a sealant. Do not paint with alkyd resin paints. Some porous or dusty surfaces may require priming. Adhesion tests are recommended before use. Contact our advisers for further questions or recommendations.

If you are dissatisfied with the product when used as described and for its intended purpose, return the container with unused product and proof of purchase to UAB NAVAKO for replacement. The returned container must not be empty. The warranty covers product replacement only and excludes labour and other costs. NO OTHER WARRANTIES are provided.

Store unused product in a dry place below +24°C. For application questions, contact the supplier or visit www.titebond.lt.

CAUTION: Read the product Safety Data Sheets before use.

KEEP OUT OF REACH OF CHILDREN.

Titebond TiteGrab Plus - description and technical data (LT)

Download

Titebond TiteGrab Plus - application leaflet (EN)

Download

Titebond construction adhesive catalogue (EN)

Download

Related products

0
    0
    Basket
    Your basket is emptyGo to shop
    Continue shopping