Sale!
A Titebond GREENchoice Heavy Duty construction adhesive cartridge against a white background
Comparison of Titebond Heavy Duty cartridge formulations and applications
Comparison chart of Titebond Heavy Duty formulations and other construction adhesives
Titebond GREENchoice Heavy Duty logo and water-based adhesive presentation
Titebond Heavy Duty cartridges against a timber building frame
A box of 12 Titebond Heavy Duty construction adhesive cartridges
Titebond GREENchoice Heavy Duty - stiprūs montažiniai klijai sunkioms apdailos medžiagoms, lauko ir vidaus darbams - Image 7

Titebond GREENchoice Heavy Duty – strong construction adhesive for heavy finishing materials, for interior and exterior use

€4.90 - €49.92

Titebond GREENchoice Heavy Duty is a strong, water-based construction adhesive for heavy finishing materials, for interior and exterior use. This construction adhesive, also known as a grab adhesive, is designed for demanding installation and repair work: it provides strong adhesion, fills gaps and surface irregularities, and forms a flexible bond.

Impressive bond strength of 84.64 kg/cm².
This is the average shear strength after 28 days (1203.9 psi) reported in the manufacturer's comparison table for the GREENchoice Water-Based formulation. The table does not specify the materials bonded or the detailed test conditions; actual performance depends on the substrate and application conditions.

  • Strong initial grab
  • Flexible, gap-filling bond
  • For interior and exterior use
  • Water clean-up before curing

Suitable for wood, plywood, cladding boards, trim, decorative panels, plasterboard, foam board, bath surrounds, plastic, metal and masonry. Can be used on damp, cold and treated timber. At least one bonding surface must be porous.

Working time: approximately 20 min. with an adhesive bead of around 6 mm.
Joining components: within 15 min. or before the adhesive skins over.
Application temperature: from +5 °C to +38 °C.

More about the adhesive and its propertiesCollapse detailed description

Strength development in the manufacturer's comparative tests:
After 1 day – 78,19 kg/cm² (1112,1 psi).
After 3 days – 80,84 kg/cm² (1149,8 psi).
Average shear strength after 28 days – 84,64 kg/cm² (1203.9 psi). Results from different tests do not indicate the permissible load for a specific installed component.

Standards: exceeds APA AFG-01, ASTM D3498 and ASTM C557 requirements.

Resistance and flexibility. The water-resistant bond remains flexible. The adhesive fills gaps and surface irregularities and is suitable for interior and exterior construction, installation and repair work. Not designed for continuous immersion in water.

Water-based formulation. The polymer emulsion blend meets VOC requirements and is described by the manufacturer as non-flammable. Uncured adhesive and tools can be cleaned with water. Follow the product Safety Data Sheet instructions during use.

Choosing suitable surfaces. Do not bond two non-porous materials together, as this may slow or prevent drying. Not recommended for mirrors. Titebond Fast Set Polyurethane is recommended for heavy metal or steel components.

Installing large components. Large components may need additional support until the adhesive dries. When installing subfloors, bond one sheet at a time and secure each sheet with nails or screws in accordance with the installation recommendations.

Save when buying a full box. Choose one cartridge or a box of 12. Select a pack to see the current price, unit price and saving. The box offer applies to online orders.

Titebond Heavy Duty – construction adhesive for interior and exterior useFor wood, plasterboard and masonry – properties, application and technical data

Product information in Lithuanian · PDF · Opens in a new tab

View the construction adhesives catalogueConstruction adhesive comparison and selection.

PDF in English · Opens in a new tab

SKU: N/A Category: Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

ThumbnailSKUQuantityWeightPriceQuantity 
7471311ml0370830747100€4.90
A box of 12 Titebond Heavy Duty construction adhesive cartridges
12-7471Box of 12 Original price was: €58.80.Current price is: €49.92.

Bond strength

The manufacturer's comparison leaflet reports the following results for the GREENchoice Water-Based formulation:

  • After 1 day: 78,19 kg/cm² (1112,1 psi).
  • After 3 days: 80,84 kg/cm² (1149,8 psi).
  • Average shear strength after 28 days: 84,64 kg/cm² (1203,9 psi).

The table does not specify the materials bonded or the detailed test conditions. These figures do not guarantee the permissible load for a particular joint. The comparison leaflet is available in the documents section.

Product features

  • Profesionalus stiprumas & našumas;
  • Water-based;
  • VOC-compliant, water-based formulation;
  • Suitable for wet and cold timber;
  • Water-repellent;
  • Creates a strong, secure bond;
  • Cleans up easily with water before drying;
  • Bonds most building materials;
  • For interior and exterior use;

Applications:

  • All interior and exterior construction, installation and repair work;
  • For all common building and finishing materials
  • Bath surround panels and components;
  • Cladding boards, wood and plywood;
  • Plasterboard, foam board, plastic and bath surrounds;
  • Metal;
  • Masonry;
  • Wet and cold timber;
  • And more.
Quantity

311 ml, Box, 12 pcs

Product type: water-based blend of polymer emulsions.
Colour: sand.
Solids content: 75 %.
Viscosity: 75 000 mPa·s (cP).
pH: 5,0.
Freeze/thaw stability: stable.
VOC: less than 50 g/L according to the attached manufacturer's technical description.
Flash point: above +93°C.

Indicative coverage according to bead diameter:
approximately 6 mm — 9.5 m;
approximately 9 mm — 4.3 m;
approximately 13 mm — 2.5 m.

Application temperature: from +5°C to +38°C  
Service temperature: from –18°C to +49°C.
Working time for adjustment: 20 minutes with a 6 mm nozzle opening.
Surface preparation: Remove dirt and any material that could prevent proper adhesive bonding. All substances that may interfere with adhesion must be removed. The user is responsible for proper surface preparation.
APPLICATION: Cut the nozzle at approximately 45°. A 0.6–1 cm opening is recommended. Pierce the cartridge seal and load it into the gun. Apply dots or a continuous bead to one surface. Press the components firmly together within 15 minutes of application.
NOTE: Bond subfloor sheets to the joists one sheet at a time.
Cleaning: clean tools and adhesive with water while wet. Dried adhesive and tools can be cleaned with a water/acetone/vinegar mixture.

GREENchoice Heavy Duty is not intended for continuous immersion. At least one bonding surface must be porous. Not recommended for mirrors. For best results, store above +4°C in a dry place. For application questions, contact the supplier or visit www.titebond.lt. GREENchoice Heavy Duty bonds well to most metals, but for heavy metal and steel components we recommend Titebond Fast Set polyurethane adhesive.

Store unused product in a dry place below +24°C. For application questions, contact the supplier or visit www.titebond.lt.

CAUTION: Read the product safety data sheets before use. KEEP OUT OF REACH OF CHILDREN.

LT aprašymas

Download

Titebond EN aprašymas

Download

EN klijų palyginimo bukletas

Download

Related products

0
    0
    Basket
    Your basket is emptyGo to shop
    Continue shopping