Titebond Quick & Thick Multi-Surface - universalūs tiršti PVA klijai medienai, keramikai, akmeniui ir audiniams, stipraus pradinio sukibimo, vidaus apdailai bei baldų remontui.
Product properties and application
„Titebond Quick & Thick Multi-Surface“ - universalūs, tiršti vandens pagrindo klijai medienai, keramikai, akmeniui, audiniui ir kitoms porėtoms medžiagoms. Skirti vidaus apdailai, baldų remontui ir smulkiems surinkimo darbams. At least one bonding surface must be porous.
Impressive bond strength of approximately 210.9 kg/cm². „Titebond Quick & Thick“ gamintojo ASTM D905 bandyme, bandant kietojo klevo jungtis kambario temperatūroje, pasiekė 3000 psi (apie 20,7 MPa) šlyties stiprį.
- ✓ Versatile – for various materials
- ✓ Thick consistency – stays where applied
- ✓ Strong initial grab
- ✓ Non-toxic
- ✓ Dries to a clear glue line
- ✓ Water clean-up before curing
Bond strength: 210,92 kg/cm²*
Open assembly time: 3-5 min.
Total assembly time: 10-15 min.
Application temperature: above +10 °C.
Versatility and applications. Multi-Surface refers to its suitability for different materials: wood, ceramics, stone, fabric and other porous materials. Suitable for trim, furniture repair and small assembly jobs. At least one side of the joint must be porous.
Preparation and bonding. Surfaces must be clean and dry. Spread the adhesive with the bottle nozzle, a roller or a brush, and join components while the glue is still wet. Hold components firmly together and remove excess before it dries.
Consistency and cleaning. The thick, thixotropic consistency helps keep the glue where it is applied. The white glue dries clear. Remove uncured excess with water or a damp cloth; scrape or sand off cured residue.
Application limitations. „Titebond Quick & Thick“ skirti vidaus darbams. Nenaudokite lauke ar ten, kur tikėtina didelė drėgmė. Lauko medienos darbams rinkitės pagal paskirtį tinkamus „Titebond II Premium“ arba „Titebond III Ultimate“ klijus. Klijų ir klijuojamų paviršių temperatūra turi būti aukštesnė nei +10 °C. Bent vienas paviršius turi būti porėtas.
Not intended for structural bonding of load-bearing building components. If proposed for a joint with additional mechanical fixings, the suitability of that arrangement must be assessed by the structural designer.
Storage. Protect from freezing. Check the condition of the glue before use.
Non-toxicity and safe use. „Titebond Quick & Thick“ - netoksiški klijai. Prieš naudodami perskaitykite saugos duomenų lapą ir laikykitės jo nurodymų. Laikykite vaikams nepasiekiamoje vietoje.
*Bond strength measured to ASTM D905, bonding maple to maple at approximately +21 °C: 3000 psi / 20.68 N/mm² / 210.92 kg/cm². Assembly times are given at +21 °C and 50 % relative humidity. Results and working time depend on the materials, surface preparation and bonding conditions.
Application examples are available under Video, with detailed technical information in the attached Lithuanian PDF.
