Titebond WeatherMaster – flexible, high-adhesion polymer sealant for exterior use and damp surfaces

Composition: One-component, moisture-curing advanced polymer sealant.
Colour: White, coloured, translucent, crystal clear.
Solids: 98%
Viscosity: 500,000 cps white, coloured and translucent; 400,000 cps crystal clear;
Total movement capability: ±25% white, coloured and translucent; ±50% crystal clear;
Elongation: 400% white and coloured, 350% translucent, 250% crystal clear;
Tensile strength: 225 psi / 158190 kg/m² — white, coloured and crystal clear; 420 psi / 295289 kg/m² — translucent; 
Tack-free time: 20–30 min. white, coloured and crystal clear; 15–20 min. translucent, at +24°C and 50% RH;
Freeze/thaw stability: Stable
VOC: 9 g/L (<0,15%) baltas ir spalvotas, 11 g/L (<0,15%) krištolo sklaidrumo, 3 g/L (<0,15%) pusiau skaidrus;
Flash point: None
Coverage, depending on nozzle opening diameter: ~ 6mm - 9,5m, 9mm - 4,3m, 13mm - 2,5m
Curing: 24 hours for a 0.6 cm joint at +24°C and 50% RH;

Application temperature: from –18°C

Service temperature: coloured from –59°C to +149°C, translucent from –40°C to +177°C, crystal clear from –59°C to +121°C; discolouration may occur at higher temperatures.

Working time: 10–15 minutes with a 6 mm nozzle opening.

Surface preparation: Remove dirt and any material that could interfere with proper adhesion. All substances that may prevent bonding must be removed. The user is responsible for proper surface preparation.

Use masking tape to achieve neat sealant lines. Remove the tape before the sealant cures.

Cleaning: Uncured coloured sealant can be removed with a dry cloth, isopropyl alcohol or acetone; use white spirit for translucent sealant.

Once cured, excess sealant must be cut away. Follow the solvent supplier's precautions when using solvents. Wash hands with soapy water after use.

Maintenance: Inspect sealant joints at least every five years. If a seal or joint is damaged, remove the sealant from the affected area and reseal with fresh product.

Air, sealant and surface temperatures must be above –18°C. Titebond® WeatherMaster™ is intended for exterior use. If used indoors, it must be painted. Paint after one hour with water-based latex paint; test compatibility with other paint types. Use masking tape for neat sealant lines and remove it once the sealant is touch-dry. For joints deeper than 1.3 cm, use backing material. Not intended for continuous immersion or below the waterline. Store unused product in a dry place below +24°C. For application questions, contact the supplier or visit www.titebond.lt.

Warranty:

If you are dissatisfied with the product when used as directed, return the container with unused product and proof of purchase to UAB NAVAKO for replacement. The returned container must not be empty. The warranty covers product replacement only and excludes labour and other costs. NO OTHER WARRANTIES are provided.

CAUTION: Read the product Safety Data Sheets before use. 

KEEP OUT OF REACH OF CHILDREN.