Sale!
A cartridge of Titebond Cove Base Plus adhesive for skirting
Titebond Cove Base Plus cartridges and product features
Titebond Cove Base Plus logo and skirting adhesive presentation against a yellow background
A box of 12 Titebond Cove Base Plus skirting adhesive cartridges
Titebond construction adhesive cartridges, including Cove Base skirting adhesive

Titebond GREENchoice Cove Base – high-grab construction adhesive for rubber and vinyl skirting and trim

€5.52 - €56.28

Titebond GREENchoice Cove Base is a high-grab, water-based construction adhesive for rubber and vinyl skirting and trim. Designed for convenient installation of finishing components: grabs quickly, helps hold components in place and prevents slipping.

Strong initial grab and a lasting flexible bond. The adhesive helps keep pressed skirting in place, while the flexible bond resists impact and cracking.

  • Fast initial hold
  • For rubber and vinyl skirting
  • Water-based formulation
  • Water clean-up before drying

Suitable for installing skirting, trim and stair tread coverings. Bonds to wood, plywood, OSB boards, plaster, plasterboard, wallpaper, tiles, properly prepared painted surfaces and concrete.

Working and repositioning time: 10-15 min. with an adhesive bead of around 6 mm.
Application temperature: from +5 °C to +38 °C.

More about the adhesive and its propertiesCollapse detailed description

Convenient installation. Fast initial grab helps reduce the need for additional support. When bonding to uneven or curved walls, components may need temporary support until the adhesive sets.

Flexibility and resistance. The bond remains flexible and impact-resistant. The adhesive is not designed for continuous immersion in water. The cured bond has a service temperature range of -18 °C to +49 °C.

Water-based formulation. Non-flammable adhesive that meets volatile organic compound (VOC) requirements. Wet adhesive and tools clean up easily with water. Read the Safety Data Sheet before use.

Adhesion and surface preparation. Exceeds ASTM C557 requirements. Surfaces must be clean and sound; remove anything that could impair adhesion and check that the chosen substrate is suitable.

A full box contains 12 cartridges. The box price, unit price and saving are shown in the pack selector below.

Titebond Cove Base Plus – adhesive for skirting and trimSolvent-free construction adhesive – properties, application instructions, coverage and technical data

Product information in Lithuanian · PDF · Opens in a new tab

View the construction adhesives catalogueConstruction adhesives – selection and application

PDF in English · Opens in a new tab

SKU: N/A Category: Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

ThumbnailSKUQuantityWeightPriceQuantity 
A cartridge of Titebond Cove Base Plus adhesive for skirting
3401311ml037083034011€5.52
A box of 12 Titebond Cove Base Plus skirting adhesive cartridges
12 pcs 3401Box of 12 Original price was: €66.24.Current price is: €56.28.

Strong initial grab and a flexible bond

Titebond GREENchoice Cove Base construction adhesive grabs quickly and helps hold skirting and trim in place. The flexible bond resists impact and cracking. The adhesive exceeds ASTM C557 requirements.

Key features

  • Strong initial grab and fast initial hold.
  • Water-based, non-flammable, VOC-compliant formulation.
  • Flexible, impact-resistant bond.
  • Adheres to common, properly prepared wall surfaces.
  • Clean wet adhesive and tools with water.

Applications and compatible surfaces

For installing rubber and vinyl skirting, trim and stair tread coverings. Suitable for wood, plywood, OSB boards, plaster, plasterboard, wallpaper, tiles, painted surfaces and concrete. Check substrate soundness and adhesion before bonding.

Quantity

311 ml, Box, 12 pcs

Product type: Polymer emulsion
Colour: Sand-coloured
Solids: 73%
Viscosity: 145 000 mPa·s
pH: 7,0
Freeze/thaw stability: Stable
Flashpoint: >94°C 
Coverage according to nozzle opening diameter: ~ 6 mm - 9,5 m, 9 mm - 4,3 m, 13 mm - 2,5 m

Application temperature: from +5°C to +38°C  
Service temperature: from –18°C to +49°C.
Working time for adjustment: 10–15 minutes with a 6 mm nozzle opening.
Surface preparation: Remove dirt and any material that could prevent proper adhesive bonding. All substances that may interfere with adhesion must be removed. The user is responsible for proper surface preparation.
APPLICATION: Cut the nozzle at approximately 45°, with a recommended opening of 0.6–1 cm. Pierce the cartridge seal and load it into the gun. Apply continuous beads to the bonding side of the item, spaced 2.5–4 cm apart. Within 10–15 minutes, press firmly against the wall and move the item slightly to spread the adhesive evenly.
NOTE: uneven or curved wall surfaces may require additional support until the adhesive sets.
Cleaning: clean tools and adhesive with water while wet. Dried adhesive and tools can be cleaned with a water/acetone/vinegar mixture.

GREENchoice Cove Base is not intended for continuous immersion. Priming, painting or roughening the surfaces before bonding can improve joint strength. For best results, store above +4°C in a cool, dry place. For application questions, contact the supplier or visit www.titebond.lt.

Store unused product in a dry place below +24°C.

CAUTION: Read the product safety data sheets before use.

KEEP OUT OF REACH OF CHILDREN

Klijai grindjuostėms ir apvadams GREENchoice COVE BASE aprašymas LT

Download

Klijai grindjuostėms ir apvadams GREENchoice COVE BASE skrajutė EN

Download

Titebond Statybiniai Klijai (skystod vinys). KATALOGAS EN

Download

Related products

0
    0
    Basket
    Your basket is emptyGo to shop
    Continue shopping