\u201eTitebond Instant Bond GEL\u201c – geliniai momentiniai cianoakrilato (CA) klijai, pirmiausia skirti medienai ir jos gaminiams, taip pat metalui, plastikui, gumai ir kitoms suderinamoms med\u017eiagoms. Its gel consistency helps precise dispensing and gives more time to align components than thinner adhesives in the range.<\/strong> Particularly suitable for porous wood, MDF, uneven surfaces, end grain, furniture assembly and decorative components.<\/p>\n \u012esp\u016bdingas klij\u0173 si\u016bl\u0117s stipris – 196,85-295,28 kg\/cm\u00b2.<\/strong> Strength depends on the materials and test conditions.*<\/p>\n Bond strength:<\/strong> 196,85-295,28 kg\/cm\u00b2* Bonding components and filling gaps.<\/strong> The gel adhesive is suitable for joints between porous surfaces and for filling small gaps. Its longer assembly time helps align furniture, wood products and decorative components precisely. Keep joined components still and allow the bond to set before loading it.<\/p>\n Resistance and finishing.<\/strong> The cured glue line is clear and resists impact, heat and solvents. It does not interfere with subsequent finishing and can be used as a final finish on turned wood products. Test compatibility with the chosen coating on a small area first.<\/p>\n Compatible materials.<\/strong> Wood, MDF, PVC, acrylic, natural rubber, glass, nylon, brass, aluminium, stainless steel, chrome, granite, polyester, polystyrene, porcelain, ceramics, leather, gemstones and fibreglass. Test compatibility with the specific surfaces in an inconspicuous area first.<\/p>\n Preparation and bonding.<\/strong> Surfaces must be clean and dry. Prepare components in advance and check their fit. Dispense small quantities. Rapid bonding can eliminate the need for clamps or shorten clamping time, depending on the joint and working conditions.<\/p>\n Curing.<\/strong> Surinkimo laikas – apie 30 sek., pradinis sukibimas – apie 20 sek. Techniniuose duomenyse taip pat nurodytas 60 sek. tvirt\u0117jimo etapas. Visi\u0161kai klijai sukiet\u0117ja per 8 val. \u0160ie laikai apib\u016bdina skirtingus etapus ir priklauso nuo med\u017eiag\u0173 bei aplinkos s\u0105lyg\u0173.<\/p>\n Use with an activator.<\/strong> Works without an activator. Titebond Instant Bond Activator can reduce initial setting time by approximately 50 %. This is not the full curing time.<\/p>\n Product purity and dispensing.<\/strong> Triple-distilled for high purity. The convenient, clog-resistant bottle nozzle helps dispense the adhesive precisely.<\/p>\n Application limitations and storage.<\/strong> For interior use. Do not use outdoors or where significant moisture is likely. Store in a cool, dry place. For best results, bond at temperatures from +12 \u00b0C to +30 \u00b0C.<\/p>\n Cleaning.<\/strong> Use acetone for cleaning. Check its suitability for the surface in an inconspicuous area first and follow the solvent's instructions.<\/p>\n Safe use.<\/strong> Saugokite od\u0105 ir akis – cianoakrilato klijai gali greitai suklijuoti od\u0105 ir aki\u0173 vokus. Laikykit\u0117s etiket\u0117je ir saugos duomen\u0173 lape pateikt\u0173 nurodym\u0173. Keep out of children's reach.<\/strong><\/p>\n *Bond strength: 2800-4200 psi \/ 196.85-295.28 kg\/cm\u00b2, depending on the materials bonded. Compare different test results only after considering the test conditions.<\/small><\/p>\n Naudojimo pavyzd\u017eius rasite skiltyje \u201eVideo\u201c, o i\u0161samius duomenis – prid\u0117tuose PDF dokumentuose.<\/p>","protected":false},"excerpt":{"rendered":"\n
Viscosity:<\/strong> 60 000 cps (60 Pa\u00b7s).
Assembly time:<\/strong> approximately 30 sec.
Initial bond:<\/strong> approximately 20 sec.
Full cure:<\/strong> within 8 hours.<\/p>\n