\u201eTitebond Instant Bond MEDIUM\u201c – vidutinio klampumo momentiniai cianoakrilato (CA) klijai, pirmiausia skirti medienai ir jos gaminiams, taip pat metalui, plastikui ir kitoms suderinamoms med\u017eiagoms. Medium viscosity helps control dispensing during bonding and small repair jobs.<\/strong> Particularly suitable for joints in MDF and other wood products, wood repair and turning projects, and hard-to-reach surfaces that are difficult to clamp.<\/p>\n \u012esp\u016bdingas klij\u0173 si\u016bl\u0117s stipris – 196,85-295,28 kg\/cm\u00b2.<\/strong> Strength depends on the materials and test conditions.*<\/p>\n Bond strength:<\/strong> 196,85-295,28 kg\/cm\u00b2* Repairing fine cracks and wood defects.<\/strong> Suitable for reattaching splinters, stabilising knots, repairing minor wood defects and loose veneer edges. Medium viscosity suits cracks, knots and small voids, while allowing controlled application. Also used to consolidate porous surfaces to reduce further crumbling or splitting.<\/p>\n Resistance and finishing.<\/strong> The cured glue line is clear and resists impact, heat and solvents. It does not interfere with subsequent finishing and can be used as a final finish on turned wood products. Test compatibility with the chosen coating on a small area first.<\/p>\n Compatible materials.<\/strong> Wood, MDF, PVC, acrylic, natural rubber, glass, nylon, brass, aluminium, stainless steel, chrome, granite, polyester, polystyrene, porcelain, ceramics, leather, gemstones and fibreglass. Test compatibility with the specific surfaces in an inconspicuous area first.<\/p>\n Preparation and bonding.<\/strong> Surfaces must be clean and dry. Prepare components in advance and check their fit. Dispense small quantities. Rapid bonding can eliminate the need for clamps or shorten clamping time, depending on the joint and working conditions.<\/p>\n Curing.<\/strong> Surinkimo laikas – apie 7 sek., pradinis sukibimas – apie 5 sek. Techniniuose duomenyse taip pat nurodytas 30 sek. tvirt\u0117jimo etapas. Visi\u0161kai klijai sukiet\u0117ja per 8 val. \u0160ie laikai apib\u016bdina skirtingus etapus ir priklauso nuo med\u017eiag\u0173 bei aplinkos s\u0105lyg\u0173.<\/p>\n Use with an activator.<\/strong> Works without an activator. Titebond Instant Bond Activator can reduce initial setting time by approximately 50 %. This is not the full curing time.<\/p>\n Product purity and dispensing.<\/strong> Triple-distilled for high purity. The convenient, clog-resistant bottle nozzle helps dispense the adhesive precisely.<\/p>\n Application limitations and storage.<\/strong> For interior use. Do not use outdoors or where significant moisture is likely. Store in a cool, dry place. For best results, bond at temperatures from +12 \u00b0C to +30 \u00b0C.<\/p>\n Cleaning.<\/strong> Use acetone for cleaning. Check its suitability for the surface in an inconspicuous area first and follow the solvent's instructions.<\/p>\n Safe use.<\/strong> Saugokite od\u0105 ir akis – cianoakrilato klijai gali greitai suklijuoti od\u0105 ir aki\u0173 vokus. Laikykit\u0117s etiket\u0117je ir saugos duomen\u0173 lape pateikt\u0173 nurodym\u0173. Keep out of children's reach.<\/strong><\/p>\n *Bond strength: 2800-4200 psi \/ 196.85-295.28 kg\/cm\u00b2, depending on the materials bonded. Compare different test results only after considering the test conditions.<\/small><\/p>\n Naudojimo pavyzd\u017eius rasite skiltyje \u201eVideo\u201c, o i\u0161samius duomenis – prid\u0117tuose PDF dokumentuose.<\/p>","protected":false},"excerpt":{"rendered":"\n
Viscosity:<\/strong> 120 cps (120 mPa\u00b7s).
Assembly time:<\/strong> approximately 7 sec.
Initial bond:<\/strong> approximately 5 sec.
Full cure:<\/strong> within 8 hours.<\/p>\n