Titebond Cold Press for Veneer – klijai faneravimui ir medienos luk\u0161to klijavimui ant MDF, dro\u017eli\u0173 plok\u0161\u010di\u0173 bei faneros \u0161altuoju presavimu, bald\u0173 gamybai.<\/p>\n
Spread the adhesive evenly over a flat, clean, porous substrate. Position the veneer and press under the conditions specified in the technical data sheet.<\/p>\n
This adhesive is designed for veneering. For general wood assembly, select a wood glue intended for that purpose.<\/p>\n
\u012esp\u016bdingas klij\u0173 si\u016bl\u0117s stipris – apie 176,3 kg\/cm\u00b2.<\/strong> In the manufacturer's ASTM D905 test on hard maple joints at room temperature, Titebond Cold Press for Veneer achieved a shear strength of 2508 psi (approximately 17.3 MPa).<\/p>\n Atvirasis laikas – apie 15 min., bendras surinkimo laikas – 15-20 min. (+21 \u00b0C, 50 % santykin\u0117 dr\u0117gm\u0117). Dirbkite auk\u0161tesn\u0117je nei +10 \u00b0C temperat\u016broje.<\/p>\n Shake the container thoroughly before use to ensure a uniform consistency and viscosity.<\/strong><\/p>\n No harmful fumes associated with contact adhesives.<\/strong> Titebond Cold Press for Veneer does not emit the harmful or corrosive fumes associated with most contact adhesives. According to the Safety Data Sheet, the mixture is not classified as hazardous. Use as intended and follow the Safety Data Sheet instructions.<\/p>\n Available pack sizes:<\/strong> 948 ml and 3.78 l.<\/p>","protected":false},"excerpt":{"rendered":"Safety and use<\/h2>\n