\u201eTitebond Original\u201c – ypa\u010d stipr\u016bs medienos klijai bald\u0173 gamybai ir remontui, med\u017eio masyvui, fanerai bei MDF plok\u0161t\u0117ms klijuoti. Jie taip pat naudojami medini\u0173 muzikos instrument\u0173 gamybai ir remontui bei vidaus stali\u0173 darbams. Stiprus pradinis sukibimas ir greitas d\u017ei\u016bvimas padeda tiksliai sujungti detales bei sutrumpina j\u0173 suspaudimo laik\u0105. Klijus paprasta naudoti tiek profesionaliam meistrui, tiek savo rankomis kurian\u010diam \u017emogui.<\/p>\n
\u012esp\u016bdingas klij\u0173 si\u016bl\u0117s stipris – apie 253,1 kg\/cm\u00b2.<\/strong> In the manufacturer's ASTM D905 test on hard maple joints at room temperature, Titebond Original achieved a shear strength of 3600 psi (approximately 24.8 MPa).<\/p>\n Bond strength:<\/strong> 253,10 kg\/cm\u00b2* Strong joints and versatile applications.<\/strong> Suitable for solid wood, plywood, MDF and other wood fibreboards and particleboards, leather, fabrics and other porous materials.<\/p>\n Machining and finishing.<\/strong> The glue line is solvent-resistant. Cured glue sands exceptionally well, does not damage woodworking tools and is suitable for subsequent finishing. To achieve an even finish, remove glue residue from visible wood surfaces: wipe uncured glue with water or a damp cloth, and scrape or sand off cured glue.<\/p>\n Standards and use.<\/strong> Netoksi\u0161ki klijai, paprastai naudojami ir lengvai nuvalomi vandeniu, kol nesukiet\u0117j\u0119. Klijai atitinka ASTM D-4236 reikalavimus. Gamintojo nurodomas LOJ kiekis – ma\u017eiau nei 0,2 g\/l. Naudodami laikykit\u0117s saugos duomen\u0173 lapo nurodym\u0173.<\/p>\n Application limitations.<\/strong> For interior use. Not suitable outdoors or where significant moisture is likely. For exterior work, choose Titebond II Premium or Titebond III Ultimate according to the specific application conditions.<\/p>\n Not intended for structural bonding of load-bearing building components.<\/strong> If proposed for a joint with additional mechanical fixings, the suitability of that arrangement must be assessed by the structural designer.<\/p>\n *Strength measured to ASTM D905, bonding maple to maple at approximately +21 \u00b0C. Assembly times are given at +21 \u00b0C and 50 % relative humidity. Actual results depend on the timber, surface preparation and bonding conditions.<\/small><\/p>\n Naudojimo pavyzd\u017eius rasite skiltyje \u201eVideo\u201c, o i\u0161samius techninius duomenis – prid\u0117tame lietuvi\u0161kame PDF.<\/p>","protected":false},"excerpt":{"rendered":"\n
Open assembly time:<\/strong> 4-6 min.
Total assembly time:<\/strong> 10-15 min.
Application temperature:<\/strong> above +10 \u00b0C.<\/p>\n