Product properties and application

„Titebond II Dark“ – rudi, vandeniui atsparūs D3 medienos klijai vidaus ir lauko darbams. Tai tamsiai rudos spalvos „Titebond II Premium“ versija, skirta tamsiai medienai, baldų gamybai ir remontui. Ruda sukietėjusi siūlė geriau dera su riešutmedžiu, raudonmedžiu, vyšnia ir kitomis tamsesnėmis medienos rūšimis.

Įspūdingas klijų siūlės stipris – apie 253,1 kg/cm². In the manufacturer's ASTM D905 test on hard maple joints at room temperature, Titebond II Dark achieved a shear strength of 3600 psi (approximately 24.8 MPa).

• ✓ Brown glue line for dark timber
• ✓ D3 water resistance
• ✓ For interior and exterior use
• ✓ Easy to sand
• ✓ Non-toxic according to the manufacturer's brochure
• ✓ Water clean-up before curing

Shake the container thoroughly before use to ensure a uniform consistency.

Bond strength: 253,10 kg/cm²*
Open assembly time: approximately 5 min.
Total assembly time: 10-15 min.
Application temperature: above +12.8 °C.

Colour and applications. Skysti klijai yra šviesiai rudi, sukietėjusi siūlė – ruda. Klijai tinka medienai, medienos plaušo ir drožlių plokštėms, odai, audiniui bei daugeliui kitų porėtų medžiagų. Stiprus pradinis sukibimas ir greitas stingimas palengvina detalių surinkimą bei padeda sutrumpinti suspaudimo laiką.

Water resistance. Titebond II Dark meets ANSI Type II water-resistance test requirements and is suitable for interior and exterior wood products.

Machining and finishing. The cured glue line sands easily and is suitable for subsequent finishing. For an even finish, remove glue residue from visible surfaces: wipe uncured glue with water or a damp cloth, and scrape or sand off cured glue. Suitable for radio-frequency (R-F) bonding systems.

Food contact. Titebond II Dark does not have manufacturer approval for indirect food contact under FDA requirements.

Non-toxicity and safe use. Gamintojo brošiūroje „Titebond II Dark“ įvardijami kaip netoksiški klijai. Jie atitinka ASTM D-4236 reikalavimus, gamintojo nurodomas LOJ kiekis – mažiau nei 4 g/l. Prieš naudojimą perskaitykite saugos duomenų lapą, venkite patekimo į akis, nenurykite ir laikykite vaikams nepasiekiamoje vietoje.

Application limitations. Not intended for continuous immersion in water or use below the waterline. Its low pH may corrode metal surfaces, so test first where relevant. Check adhesion when bonding preservative-treated timber; consult the supplier about exotic or oily woods such as ipé and teak. Protect from freezing. Shaking may help restore glue thickened by freezing, but check its condition before use.

Not intended for structural bonding of load-bearing building components. If proposed for a joint with additional mechanical fixings, the suitability of that arrangement must be assessed by the structural designer.

*Strength measured to ASTM D905, bonding maple to maple at approximately +21 °C (3600 psi). Assembly times are given at +21 °C and 50 % relative humidity. Actual results depend on the timber, surface preparation and bonding conditions.

Naudojimo pavyzdžius rasite skiltyje „Video“, o išsamius techninius duomenis – pridėtame lietuviškame PDF.