„Titebond All Purpose White Glue“ – universalūs balti PVA klijai medienai, popieriui, kartonui, audiniui, keramikai ir kitoms porėtoms medžiagoms. Tinka rankdarbiams, modeliams, namų remontui ir medienos darbams vidaus patalpose. The glue dries clear.

Įspūdingas klijų siūlės stipris – apie 249,6 kg/cm². In the manufacturer's ASTM D905 test on hard maple joints at room temperature, Titebond All Purpose White Glue achieved a shear strength of 3550 psi (approximately 24.5 MPa).

• ✓ All-purpose PVA glue for porous materials
• ✓ Strong initial grab
• ✓ Dries clear
• ✓ Non-toxic
• ✓ Paintable
• ✓ Water clean-up before curing

Bond strength: 249,58 kg/cm²*
Open assembly time: 5 min.
Total assembly time: 10-15 min.
Application temperature: above +10 °C.

Shake the container thoroughly before use to ensure a uniform consistency and viscosity.

Preparation and bonding. Surfaces must be clean and dry. Apply a thin, even layer using the bottle nozzle, a brush or a roller. Join the components and keep them pressed together until the required bond is achieved. Recommended clamping pressures for each material are listed under Physical properties.

Clear glue line and cleaning. The white glue dries clear and the bonded area can be painted. Clean uncured glue with water or a damp cloth. Scrape or sand off cured excess.

Application limitations. For porous materials indoors. Do not use outdoors or where moisture exposure is likely. For exterior woodworking, choose Titebond II Premium or Titebond III Ultimate as appropriate. Air, glue and material temperatures must be above +10 °C.

Not intended for structural bonding of load-bearing building components. If proposed for a joint with additional mechanical fixings, the suitability of that arrangement must be assessed by the structural designer.

Non-toxicity and safe use. „Titebond All Purpose White Glue“ – netoksiški klijai, atitinkantys ASTM D4236 reikalavimus. Prieš naudojimą perskaitykite saugos duomenų lapą ir laikykitės jo nurodymų. Laikykite vaikams nepasiekiamoje vietoje.

Storage. Saugokite nuo užšalimo. Sandariai uždarytoje taroje, žemesnėje nei +24 °C temperatūroje tinkamumo laikas – 24 mėnesiai. Užšalę klijai gali sutirštėti; išmaišius turėtų atsikurti pradinė konsistencija. Prieš naudodami įvertinkite klijų vienalytiškumą.

*Bond strength measured by bonding maple to maple at approximately +21 °C: 24.47 N/mm² / 249.58 kg/cm². Assembly times are given at +21 °C and 50 % relative humidity. Results and working time depend on the materials, surface preparation and bonding conditions.

Naudojimo pavyzdžius rasite skiltyje „Video“, o išsamią informaciją – pridėtame lietuviškame PDF.