Product properties and application

„Titebond Quick & Thick Multi-Surface“ – universalūs, tiršti vandens pagrindo klijai medienai, keramikai, akmeniui, audiniui ir kitoms porėtoms medžiagoms. Skirti vidaus apdailai, baldų remontui ir smulkiems surinkimo darbams. At least one bonding surface must be porous.

Įspūdingas klijų siūlės stipris – apie 210,9 kg/cm². „Titebond Quick & Thick“ gamintojo ASTM D905 bandyme, bandant kietojo klevo jungtis kambario temperatūroje, pasiekė 3000 psi (apie 20,7 MPa) šlyties stiprį.

• ✓ Universalūs – įvairioms medžiagoms
• ✓ Tiršti – išlieka tepimo vietoje
• ✓ Strong initial grab
• ✓ Non-toxic
• ✓ Dries to a clear glue line
• ✓ Water clean-up before curing

Bond strength: 210,92 kg/cm²*
Open assembly time: 3-5 min.
Total assembly time: 10-15 min.
Application temperature: above +10 °C.

Versatility and applications. Multi-Surface refers to its suitability for different materials: wood, ceramics, stone, fabric and other porous materials. Suitable for trim, furniture repair and small assembly jobs. At least one side of the joint must be porous.

Preparation and bonding. Surfaces must be clean and dry. Spread the adhesive with the bottle nozzle, a roller or a brush, and join components while the glue is still wet. Hold components firmly together and remove excess before it dries.

Consistency and cleaning. Tiksotropinė, tiršta konsistencija padeda išlaikyti klijus tepimo vietoje. Balti klijai išdžiūvę tampa skaidrūs. Nesukietėjęs perteklius nuvalomas vandeniu ar drėgna šluoste, sukietėjęs – nuskutamas arba nušlifuojamas.

Application limitations. „Titebond Quick & Thick“ skirti vidaus darbams. Nenaudokite lauke ar ten, kur tikėtina didelė drėgmė. Lauko medienos darbams rinkitės pagal paskirtį tinkamus „Titebond II Premium“ arba „Titebond III Ultimate“ klijus. Klijų ir klijuojamų paviršių temperatūra turi būti aukštesnė nei +10 °C. Bent vienas paviršius turi būti porėtas.

Not intended for structural bonding of load-bearing building components. If proposed for a joint with additional mechanical fixings, the suitability of that arrangement must be assessed by the structural designer.

Storage. Protect from freezing. Check the condition of the glue before use.

Non-toxicity and safe use. „Titebond Quick & Thick“ – netoksiški klijai. Prieš naudodami perskaitykite saugos duomenų lapą ir laikykitės jo nurodymų. Laikykite vaikams nepasiekiamoje vietoje.

*Bond strength measured to ASTM D905, bonding maple to maple at approximately +21 °C: 3000 psi / 20.68 N/mm² / 210.92 kg/cm². Assembly times are given at +21 °C and 50 % relative humidity. Results and working time depend on the materials, surface preparation and bonding conditions.

Naudojimo pavyzdžius rasite skiltyje „Video“, o išsamius techninius duomenis – pridėtame lietuviškame PDF.

Product properties and application

„Titebond Instant Bond Jet Black“ – juodi, kaučiuku sustiprinti momentiniai cianoakrilato klijai medienai ir kitoms suderinamoms medžiagoms. Tinka medienos remontui, tekinimo ir drožybos darbams, plyšiams, įtrūkimams, sujungimų tarpams bei tuštumoms užpildyti, inkrustacijai ir dekoratyviniams intarpams. Cures to a gloss black glue line.

Įspūdingas klijų siūlės stipris – 196,85-295,28 kg/cm². The stated strength depends on the materials being bonded and should be assessed for the particular joint.*

• ✓ For bonding and gap filling
• ✓ Rubber-toughened, impact-resistant formulation
• ✓ For wood and other compatible materials
• ✓ Gloss black glue line
• ✓ For repairs and decorative inlays
• ✓ The cured filler can be sanded

Bond strength: 196,85-295,28 kg/cm²*
Viscosity: 500 cps.
Application temperature: from +13 °C to +29 °C.
Full cure: within 24 hours.

Compatible materials. Wood, metal, rubber, ceramics, plastic, stone, leather, PVC, granite, porcelain, fibreglass and gemstones. Check compatibility with the specific surfaces in an inconspicuous area before bonding.

Resistance and finishing. Kaučiuku sustiprinta formulė pasižymi dideliu atsparumu smūgiams. Sukietėję klijai atsparūs tirpikliams, karščiui ir šalčiui; eksploatavimo temperatūra – nuo -54 °C iki +138 °C. Klijai netrukdo vėlesnei paviršiaus apdailai. Pasirinktos dangos suderinamumą pirmiausia išbandykite nedideliame plote.

Use with an activator. Works without an activator. Titebond Instant Bond Activator can reduce initial setting time by approximately 50 %. This is not the full curing time.

Product purity and dispensing. Triple-distilled for high purity. The convenient, clog-resistant bottle nozzle helps dispense the adhesive precisely.

Preparation and bonding. Surfaces must be clean and dry. Test in an inconspicuous area before use, particularly when bonding other materials or treated surfaces. Dispense small quantities and protect the surrounding timber from staining.

Gaps and decorative inlays. The black colour is suitable for filling wood cracks and gaps and highlighting decorative details. The cured glue line remains black and the filler can be sanded. Allow the adhesive to cure before sanding and final finishing.

Curing. Pradinis tvirtėjimas – per 40-60 sek., visiškas sukietėjimas – per 24 val. Tvirtėjimo laikas priklauso nuo klijuojamų medžiagų ir aplinkos sąlygų.

Application limitations and storage. For interior use. Do not use outdoors or where significant moisture is likely. Store in a cool, dry place. For best results, bond at temperatures from +13 °C to +29 °C.

Cleaning. The technical data specify acetone for cleaning. Check its suitability for the surface in an inconspicuous area first.

Safe use. Saugokite odą ir akis – cianoakrilato klijai gali greitai suklijuoti odą ir akių vokus. Laikykitės etiketėje ir saugos duomenų lape pateiktų nurodymų. Keep out of children's reach.

*Bond strength: 2800-4200 psi / 196.85-295.28 kg/cm², depending on the materials bonded. This is a strength range for joints between different materials and should not be compared directly with other adhesive test results without considering the test conditions.

Naudojimo pavyzdžius rasite skiltyje „Video“, o išsamius duomenis – pridėtuose PDF dokumentuose.

„Titebond Instant Bond THIN“ – labai mažo klampumo momentiniai cianoakrilato (CA) klijai, pirmiausia skirti medienai ir jos gaminiams, taip pat metalui, plastikui ir kitoms suderinamoms medžiagoms. Its fluid consistency helps it penetrate narrow gaps and fine cracks. Suitable for close-fitting, hard-to-reach joints and surfaces that are difficult to clamp.

Įspūdingas klijų siūlės stipris – 196,85-295,28 kg/cm². Strength depends on the materials and test conditions.*

• ✓ Labai skysti – 5 cps klampumas
• ✓ Fast initial bond
• ✓ For repairing fine cracks and splinters
• ✓ For wood, metal, plastic and more
• ✓ Clear cured glue line
• ✓ Resistant to impact, heat and solvents

Bond strength: 196,85-295,28 kg/cm²*
Viscosity: 5 cps (5 mPa·s).
Assembly time: approximately 5 sec.
Initial bond: approximately 3 sec.
Full cure: within 8 hours.

Repairing fine cracks and wood defects. Suitable for reattaching splinters, stabilising knots, repairing minor wood defects and loose veneer edges. The low viscosity is particularly useful for narrow gaps and close-fitting joints.

Resistance and finishing. The cured glue line is clear and resists impact, heat and solvents. It does not interfere with subsequent finishing and can be used as a final finish on turned wood products. Test compatibility with the chosen coating on a small area first.

Compatible materials. Wood, MDF, PVC, acrylic, natural rubber, glass, nylon, brass, aluminium, stainless steel, chrome, granite, polyester, polystyrene, porcelain, ceramics, leather, gemstones and fibreglass. Test compatibility with the specific surfaces in an inconspicuous area first.

Preparation and bonding. Surfaces must be clean and dry. Prepare components in advance and check their fit. Dispense small quantities. Rapid bonding can eliminate the need for clamps or shorten clamping time, depending on the joint and working conditions.

Curing. Surinkimo laikas – apie 5 sek., pradinis sukibimas – apie 3 sek. Techniniuose duomenyse taip pat nurodytas 30 sek. tvirtėjimo etapas. Visiškai klijai sukietėja per 8 val. Šie laikai apibūdina skirtingus etapus ir priklauso nuo medžiagų bei aplinkos sąlygų.

Use with an activator. Works without an activator. Titebond Instant Bond Activator can reduce initial setting time by approximately 50 %. This is not the full curing time.

Product purity and dispensing. Triple-distilled for high purity. The convenient, clog-resistant bottle nozzle helps dispense the adhesive precisely.

Application limitations and storage. For interior use. Do not use outdoors or where significant moisture is likely. Store in a cool, dry place. For best results, bond at temperatures from +12 °C to +30 °C.

Cleaning. Use acetone for cleaning. Check its suitability for the surface in an inconspicuous area first and follow the solvent's instructions.

Safe use. Saugokite odą ir akis – cianoakrilato klijai gali greitai suklijuoti odą ir akių vokus. Laikykitės etiketėje ir saugos duomenų lape pateiktų nurodymų. Keep out of children's reach.

*Bond strength: 2800-4200 psi / 196.85-295.28 kg/cm², depending on the materials bonded. Compare different test results only after considering the test conditions.

Naudojimo pavyzdžius rasite skiltyje „Video“, o išsamius duomenis – pridėtuose PDF dokumentuose.