Product properties and application

„Titebond Instant Bond Jet Black“ – juodi, kaučiuku sustiprinti momentiniai cianoakrilato klijai medienai ir kitoms suderinamoms medžiagoms. Tinka medienos remontui, tekinimo ir drožybos darbams, plyšiams, įtrūkimams, sujungimų tarpams bei tuštumoms užpildyti, inkrustacijai ir dekoratyviniams intarpams. Cures to a gloss black glue line.

Įspūdingas klijų siūlės stipris – 196,85-295,28 kg/cm². The stated strength depends on the materials being bonded and should be assessed for the particular joint.*

• ✓ For bonding and gap filling
• ✓ Rubber-toughened, impact-resistant formulation
• ✓ For wood and other compatible materials
• ✓ Gloss black glue line
• ✓ For repairs and decorative inlays
• ✓ The cured filler can be sanded

Bond strength: 196,85-295,28 kg/cm²*
Viscosity: 500 cps.
Application temperature: from +13 °C to +29 °C.
Full cure: within 24 hours.

Compatible materials. Wood, metal, rubber, ceramics, plastic, stone, leather, PVC, granite, porcelain, fibreglass and gemstones. Check compatibility with the specific surfaces in an inconspicuous area before bonding.

Resistance and finishing. Kaučiuku sustiprinta formulė pasižymi dideliu atsparumu smūgiams. Sukietėję klijai atsparūs tirpikliams, karščiui ir šalčiui; eksploatavimo temperatūra – nuo -54 °C iki +138 °C. Klijai netrukdo vėlesnei paviršiaus apdailai. Pasirinktos dangos suderinamumą pirmiausia išbandykite nedideliame plote.

Use with an activator. Works without an activator. Titebond Instant Bond Activator can reduce initial setting time by approximately 50 %. This is not the full curing time.

Product purity and dispensing. Triple-distilled for high purity. The convenient, clog-resistant bottle nozzle helps dispense the adhesive precisely.

Preparation and bonding. Surfaces must be clean and dry. Test in an inconspicuous area before use, particularly when bonding other materials or treated surfaces. Dispense small quantities and protect the surrounding timber from staining.

Gaps and decorative inlays. The black colour is suitable for filling wood cracks and gaps and highlighting decorative details. The cured glue line remains black and the filler can be sanded. Allow the adhesive to cure before sanding and final finishing.

Curing. Pradinis tvirtėjimas – per 40-60 sek., visiškas sukietėjimas – per 24 val. Tvirtėjimo laikas priklauso nuo klijuojamų medžiagų ir aplinkos sąlygų.

Application limitations and storage. For interior use. Do not use outdoors or where significant moisture is likely. Store in a cool, dry place. For best results, bond at temperatures from +13 °C to +29 °C.

Cleaning. The technical data specify acetone for cleaning. Check its suitability for the surface in an inconspicuous area first.

Safe use. Saugokite odą ir akis – cianoakrilato klijai gali greitai suklijuoti odą ir akių vokus. Laikykitės etiketėje ir saugos duomenų lape pateiktų nurodymų. Keep out of children's reach.

*Bond strength: 2800-4200 psi / 196.85-295.28 kg/cm², depending on the materials bonded. This is a strength range for joints between different materials and should not be compared directly with other adhesive test results without considering the test conditions.

Naudojimo pavyzdžius rasite skiltyje „Video“, o išsamius duomenis – pridėtuose PDF dokumentuose.